We work alongside building services and M&E consultants to define AV containment, power and data requirements at the point they can still be designed in properly — then produce a CAD/BIM-aligned specification and tender pack that coordinates with the wider M&E package instead of fighting it for space.
Cable counts, first fix requirements and power loads handed over in time to actually influence your containment design, not discovered during install.
AV specified to sit alongside your M&E package — data cabling, rack power and HVAC clearances designed in from the start, not squeezed in afterwards.
Category cabling, containment routes and rack rooms specified to a standard that holds up to the same scrutiny as the rest of your M&E design.
A single accountable AV partner for the design, the tender pack and, where needed, commissioning — rather than a chain of AV subcontractors each covering one piece.
AV power, data and containment requirements defined early enough to inform your first-pass M&E design rather than requiring a revision once AV turns up.
Rack elevations, cable schedules and containment routes produced to sit inside your M&E drawings, with CAD/BIM output for shared-model projects.
A full AV tender pack ready for contractor pricing, plus commissioning support alongside your BMS and wider M&E commissioning programme.
Coordinating AV requirements directly with the architectural design.
See how we work with architects →Handing over containment and cabling requirements ready for first fix.
See how we work with fit-out contractors →The full process — design brief, CAD/BIM drawings, tender pack and contractor appointment.
See the full service →At concept design, ideally — cable counts, containment routes and power loads for AV are far easier to build into a first-pass M&E design than to retrofit once containment sizing is already fixed.
Yes — rack elevations, cable schedules and containment routes are produced to sit directly inside your M&E drawing set, with CAD/BIM output where the project needs it.
Yes — AV commissioning can run alongside your wider M&E and BMS commissioning programme rather than as a separate, disconnected phase at the end.
Yes — either as a standalone AV package or coordinated within a wider M&E tender. See our design consultation & tender management service for the full process.
Tell us about the project stage and we'll tell you what we need from you, and by when.
Tell us what you're trying to do and we'll scope it properly — usually the fastest route for anything non-standard.
Get in touchTell us about the project and we’ll tell you what we need, and by when, to keep your programme on track.
Find our work useful? Add us as a preferred source on Google.